1 / 11A 3.5 tonne, 80V lithium-ion forklift on pneumatic tyres and an IC-style chassis, built for firms moving a diesel fleet to electric. Strong enough for the yard, clean enough for indoors.
Ask us for a price and a delivery date.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI).
Not sure? Tell us what you lift and we'll recommend the right truck.
The EFL35-PRO belongs to EP's PRO series, launched in 2025 and aimed squarely at diesel users. These are the parts that make the difference on site.
The truck is laid out like a diesel, with a 1,753 mm wheelbase, pneumatic tyres and 165 mm of clearance under the middle. Overall width stays at 1,210 mm, so it fits where a standard electric truck goes. It travels at 19 km/h laden and climbs a 20% slope with a load.
The 80V pack is made of three separate modules. If one develops a fault it can be repaired or swapped on its own, rather than replacing the whole battery. Charge from the onboard port or an external charger, and top up in breaks.
Direction, lift, tilt, sideshift and a fourth hydraulic function sit at the end of the armrest, with the horn, indicators, a USB port and an emergency switch. Fork levelling, clamp interlock and a fifth function can be added.
The touchscreen shows charge, speed, direction, wheel angle and an hour meter, and runs the lights, wipers and cab heater. Optional readouts add mast tilt, lift height and load weight, which helps when placing heavy loads high up.
A large access step, a suspension seat with armrest and a smaller steering wheel make getting in and driving less tiring. Noise at the seat is under 70 dB(A). Controllers sit behind removable panels, so our engineers can reach them quickly.
LED lights, an electric parking brake and automatic stop on ramps come with the truck. Standard telematics report uptime, battery status and location, which helps with fleet planning and remote fault-finding. A heated full cab and a glass-roof guard are on the options list.
Photos from EP Equipment of the EFL Pro range, the family the EFL35-PRO belongs to, at work. Tap a photo to enlarge it.
Same truck, different battery sizes, so you only pay for the capacity you'll use.
Most single shifts, with top-up charging in breaks.
Multi-shift work or busy yards where the truck rarely stops. Capacity can also be raised later with an EP upgrade kit.
Not sure which size? Tell us your shift pattern and we'll recommend one.
Figures from EP's datasheet for the standard truck. Mast, battery and options change some values. Source: EP's EFL35-PRO datasheet.
| Rated capacity | 3,500 kg |
|---|---|
| Tilt of mast/fork carriage forward/backward | 6° / 6° |
| Height, mast lowered | 2,065 mm |
| Free lift | 135 mm |
| Lift | 3,000 mm |
| Height, mast extended | 4,130 mm |
| Coupling height | 510 mm |
| Fork carriage ISO 2328, class/type A, B | 3A |
| Operating pressure for attachments | 180 bar |
| Oil volume for attachments | 35ℓ/min |
| Max lift height | 6,000 mm |
| Load centre distance | 500 mm |
|---|---|
| Load distance, centre of drive axle to fork | 486 mm |
| Wheelbase | 1,753 mm |
| Service weight | 5,250 kg |
| Axle loading, laden front/rear | 7748 / 1,002 kg |
| Axle loading, unladen front/rear | 2267 / 2,983 kg |
| Tread width, front | 1,010 mm |
| Tread width, rear | 980 mm |
| Height of overhead guard (cabin) | 2,170 mm |
| Seat height relating to SIP/stand height | 1,138 mm |
| Overall length | 3,682 mm |
| Length to face of forks | 2,612 mm |
| Overall width | 1,210 mm |
| Fork dimensions | 50 × 122 × 1,070 mm |
| Fork carriage width | 1,100 mm |
| Ground clearance, laden, below mast | 130 mm |
| Ground clearance, centre of wheelbase | 165 mm |
| Aisle width for pallets 1000×1200 crossways | 4,081 mm |
| Aisle width for pallets 800 × 1200 lengthways | 4,281 mm |
| Turning radius | 2,395 mm |
| Sound pressure level at the driver's seat | ﹤70 dB(A) |
| Travel speed, laden/unladen | 19 / 20 km/h |
|---|---|
| Lift speed, laden/unladen | 0.49 / 0.52 m/s |
| Lowering speed, laden/unladen | 0.43 / 0.44 m/s |
| Max. gradeability, laden/unladen | 20 / 28 % |
| Service brake | Hydraulic |
| Parking brake | Electromagnetic |
| Turnover efficiency according to VDI 2198 | 22.96t/kWh |
| Steering design | Hydraulic |
| Drive motor rating S2 60 min | 17 kW |
|---|---|
| Lift motor rating at S3 15% | 30 kW |
| Battery voltage/nominal capacity | 80V280AHV/Ah |
| Battery weight | 184 kg |
| Energy consumption according to DIN EN 16796 | 9.34 kWh/h |
| Tyres | Pneumatic |
|---|---|
| Tyre size, front | 28 × 9-15-14PRmm |
| Tyre size, rear | 6.50-10-10PRmm |
| Wheels, number front/rear | 2x/ 2 x=drive wheels |
| Model designation | EFL35-PRO |
|---|---|
| Drive | Electric |
| Operator type | Seated |
| Drawbar pull, laden/unladen | 5924 |
| Max. drawbar pull, laden/unladen | 22,350 N |
| Turnover output according to VDI 2198 | 217t/h |
| Type of drive unit | AC |
The closest EP 4-wheel forklifts by capacity and lift height.
| Spec | EFL35-PROThis model | EFL352X5 | EFL353 | EFL353S |
|---|---|---|---|---|
| Capacity | 3,500 kg | 3,500 kg | 3,500 kg | 3,500 kg |
| Max lift height | 6.0 m | 6.0 m | 6.0 m | 6.0 m |
| Battery | 80V / 280Ah | 280Ah | 80V / 280Ah | 80V / 280Ah |
| Turning radius | 2,395 mm | 2,498 mm | 2,405 mm | 2,405 mm |
| Overall width | 1,210 mm | 1,230 mm | 1,210 mm | 1,210 mm |
| Travel speed | 19 / 20 km/h | 16 / 17 km/h | 11 / 12 km/h | 16 / 17 km/h |
| Weight | 5,250 kg | 5,020 kg | 4,570 kg | 4,625 kg |

Own it outright. We supply it from stock or order it new from EP, and deliver it on our own trailer.
See what is in stockA new EFL35-PRO at a weekly price on a 12-month contract, with servicing, repairs and inspections included.
How contract hire worksOur own engineers service it, and we hold EP parts in stock. For parts, email parts@clearlift.eu.
Service and repairsAnything else, call us on 01 5267 411 (ROI) or 028 3833 7038 (NI).
Yes. It runs on pneumatic tyres with 165 mm of ground clearance at the centre of the wheelbase, and EP rates it IPX4 against splashing water. It suits yards, docks and uneven ground as well as warehouse floors.
Both lift 3.5 t to 6 m on 80V lithium. The EFL35-PRO is EP's newer PRO series, with an IC-style chassis, armrest controls, a touchscreen and telematics as standard. If you don't need those, the EFL353 is the simpler choice.
The standard pack is 80V 280Ah, and a 560Ah option suits multi-shift work. Because the battery is modular, capacity can be raised later with an upgrade kit. Tell us your shift pattern and we'll recommend a size.
That's what the PRO series was designed for. For loads up to 3.5 t and lifts up to 6 m it usually can, with 19 km/h laden travel and 20% laden gradeability. Send us your loads, heights and ground conditions and we'll confirm.
It turns in 2,395 mm and is 1,210 mm wide. For 1000 x 1200 pallets carried crossways, allow an aisle of 4,081 mm.
It records uptime, battery status and the truck's location in real time, and supports remote diagnostics. It comes as standard, so there's nothing extra to fit.
Yes, on contract hire, at a weekly price on a 12-month contract, with servicing and repairs included. We don't offer short-term hire. See forklift hire.
It depends on the mast, battery and options you need. Ask for a price and we'll quote it to buy outright or on contract hire.
Our own engineers, from our Navan depot and Portadown office, using EP parts. We look after customers across Ireland and Northern Ireland.
The closest models in the range. Prices show where we have one in stock.
Tell us your loads, lift height and site. We'll reply the same working day with a price to buy or to hire, and the right specification for the job.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI), or email sales@clearlift.ie.