1 / 11EP EFL252X2 electric forklift
EP's entry-level 2.5 tonne lithium-ion forklift, on pneumatic tyres for yard and warehouse work. A sensible step from an old diesel or used truck to electric.
- Lift capacity
- 2,500 kg
- Max lift height
- 4.8 m
- Lithium-ion battery
- 80V 100Ah
- Onboard charger
- 35A
Ask us for a price and a delivery date.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI).
- Ireland's exclusive EP Equipment dealer
- Buy, or hire on a 12-month contract
- Delivered and serviced by our own engineers
- Download the EFL252X2 datasheet (PDF)
- See all EP 4-wheel forklifts
Who the EFL252X2 suits, and when to pick another model
Built for
- First move from diesel or a used truck to electric
- Light to medium duty yard and warehouse work
- Loads up to 2.5 t and lift heights up to 4.8 m
- Retail warehouses and general manufacturing
- Single shifts with top-up charging in breaks
Look at another EP model if
- You need 6 m or a bigger batteryEFL252X52.5 t, 6 m, modular 280 or 560Ah
- Your loads go up to 3 tEFL302X2entry model, 3 t, 80V 100Ah
- You run longer or harder shiftsEFL2532.5 t, 80V 205Ah, 6 m
- Your loads stay under 2 tEFL2032 t, pneumatic tyres, 80V 230Ah
Not sure? Tell us what you lift and we'll recommend the right truck.
What makes the EFL252X2 work
The X2 keeps things simple: 2.5 tonnes, lithium power and pneumatic tyres, without the extras of the bigger series. Here's what you get.
A straightforward start in lithium
EP built the X2 as an affordable way to replace a combustion or second-hand truck. You get 2.5 t capacity on an 80V system without paying for performance you will not use.
PMSM drive and lift
Permanent-magnet motors, 8 kW for drive and 16 kW for lift, give steady torque and smooth lifting. EP rates them at up to 15% less energy than conventional AC motors.
Charge from a standard socket
The X2 is EP's entry model, so it keeps the battery simple: one 80V, 100Ah lithium-ion pack weighing 107 kg, fed by the 35A charger on board. No watering, no swaps, and short top-ups in breaks keep it going.
Fine control when stacking
Proportional lift control lets the driver place loads gently. That helps with fragile goods and tight racking up to 4.8 m.
Happy outside
Pneumatic tyres, a waterproof chassis and 150 mm of ground clearance cope with yards and uneven ground. It climbs a 15% slope laden or empty.
Comfortable cab
Even as the entry-level 2.5 t truck, the EFL252X2 gives drivers a suspended seat with a belt, plenty of legroom and a steering column that adjusts to fit. Proportional lift control makes fine placing easier, and the cab stays below 74 dB(A).
The EFL252X2 in action
Photos from EP Equipment of the EFL252X2 at work. Tap a photo to enlarge it.
EFL252X2 technical specifications
Figures from EP's datasheet for the standard truck. Mast, battery and options change some values. Source: EP's EFL252X2 datasheet.
Capacity and lifting11
| Rated capacity | 2,500 kg |
|---|---|
| Max lift height | 4,800 mm |
| Tilt of mast/fork carriage forward/backward | 6° / 10° |
| Height, mast lowered | 2,090 mm |
| Free lift | 135 mm |
| Lift | 3,000 mm |
| Height, mast extended | 4,025 mm |
| Coupling height | 445 mm |
| Fork carriage ISO 2328, class/type A, B | 2A |
| Operating pressure for attachments | 180 bar |
| Oil volume for attachments | 25ℓ/min |
Dimensions and weight20
| Load centre distance | 500 mm |
|---|---|
| Load distance, centre of drive axle to fork | 495 mm |
| Wheelbase | 1,650 mm |
| Service weight | 4,116 kg |
| Axle loading, laden front/rear | 5813 / 803 kg |
| Axle loading, unladen front/rear | 1805 / 2,311 kg |
| Tread width, front | 975 mm |
| Tread width, rear | 955 mm |
| Height of overhead guard (cabin) | 2,170 mm |
| Seat height relating to SIP/stand height | 1,100 mm |
| Overall length | 3,598 mm |
| Length to face of forks | 2,528 mm |
| Overall width | 1,154 mm |
| Fork dimensions | 40 × 122 × 1,070 mm |
| Fork carriage width | 1,100 mm |
| Ground clearance, laden, below mast | 110 mm |
| Ground clearance, centre of wheelbase | 150 mm |
| Aisle width for pallets 1000×1200 crossways | 3,953 mm |
| Aisle width for pallets 800 × 1200 lengthways | 4,153 mm |
| Turning radius | 2,258 mm |
Performance8
| Travel speed, laden/unladen | 11 / 12 km/h |
|---|---|
| Lift speed, laden/unladen | 0.29 / 0.36 m/s |
| Lowering speed, laden/unladen | 0.4 / 0.43 m/s |
| Max. gradeability, laden/unladen | 15 / 15 % |
| Service brake | Hydraulic |
| Parking brake | Mechanical |
| Turnover efficiency according to VDI 2198 | 31.98 |
| Steering design | Hydraulic |
Battery and electrics7
| Drive motor rating S2 60 min | 8 kW |
|---|---|
| Lift motor rating at S3 15% | 16 kW |
| Battery voltage | 80 V |
| Battery nominal capacity K5 | 100 Ah |
| Battery type | Li-Ion |
| Battery weight | 107 kg |
| Energy consumption according to DIN EN 16796 | 6.64 kWh/h |
Tyres and wheels4
| Tyres | Pneumatic |
|---|---|
| Tyre size, front | 7.00-12-12PRmm |
| Tyre size, rear | 18 × 7-8-14PRmm |
| Wheels, number front/rear | 2x/2 x=drive wheels |
Other6
| Manufacturer | EP |
|---|---|
| Model designation | EFL252 × 2 |
| Drive | Electric |
| Operator type | Seated |
| Turnover output according to VDI 2198 | 150 |
| Type of drive unit | PMSM |
EFL252X2 against similar EP models
The closest EP 4-wheel forklifts by capacity and lift height.
| Spec | EFL252X2This model | EFL252X5 | EFL253 | EFL253S |
|---|---|---|---|---|
| Capacity | 2,500 kg | 2,500 kg | 2,500 kg | 2,500 kg |
| Max lift height | 4.8 m | 6.0 m | 6.0 m | 6.0 m |
| Battery | 80V / 100Ah | 280Ah | 80V / 205Ah | 80V / 230Ah |
| Turning radius | 2,258 mm | 2,270 mm | 2,305 mm | 2,305 mm |
| Overall width | 1,154 mm | 1,154 mm | 1,154 mm | 1,154 mm |
| Travel speed | 11 / 12 km/h | 16 / 17 km/h | 11 / 12 km/h | 16 / 17 km/h |
| Weight | 4,116 kg | 3,835 kg | 3,780 kg | 3,955 kg |
Buy it, or hire it on a 12-month contract
Buy it new
Own it outright. We supply it from stock or order it new from EP, and deliver it on our own trailer.
See what is in stockHire it
A new EFL252X2 at a weekly price on a 12-month contract, with servicing, repairs and inspections included.
How contract hire worksService and parts
Our own engineers service it, and we hold EP parts in stock. For parts, email parts@clearlift.eu.
Service and repairsQuestions about the EFL252X2
Anything else, call us on 01 5267 411 (ROI) or 028 3833 7038 (NI).
What makes the EFL252X2 an entry-level truck?
It has a single 80V, 100Ah battery, a 4.8 m maximum lift and a top speed of 12 km/h. That keeps the cost down for light to medium duty, where a bigger battery and faster truck would not earn their keep.
How is it different from the EFL252X5?
The X5 lifts to 6.0 m, travels at up to 17 km/h against 12 km/h, climbs 25% against 15% unladen, and has a modular 280Ah battery that can go to 560Ah. The X2 is the simpler, lower-cost option.
Can it work outside?
It was designed for both. The X2 pairs a waterproof chassis with pneumatic tyres and 150 mm of clearance at mid-wheelbase, so yards and damp days are no problem. Bear in mind its 4.8 m maximum lift and 15% gradeability when planning ramps.
Can it replace a diesel forklift?
For light to medium duty with loads up to 2.5 t and lifts up to 4.8 m, often yes, with no fuel, oil changes or exhaust. If your shifts are long, consider a model with a bigger battery.
How does charging work?
The 35A onboard charger plugs into a standard outlet. You can top up in breaks without harming the lithium battery.
Can I hire the EFL252X2?
Yes, on contract hire, at a weekly price on a 12-month contract, with servicing and repairs included. We don't offer short-term hire. See forklift hire.
How much does the EFL252X2 cost?
It depends on the mast, battery and options you need. Ask for a price and we'll quote it to buy outright or on contract hire.
Who services the EFL252X2?
Our own engineers, from our Navan depot and Portadown office, using EP parts. We look after customers across Ireland and Northern Ireland.
Other EP models to look at
The closest models in the range. Prices show where we have one in stock.
Similar to the EFL252X2
Get a price on the EP EFL252X2
Tell us your loads, lift height and site. We'll reply the same working day with a price to buy or to hire, and the right specification for the job.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI), or email sales@clearlift.ie.