Finds its own way with 3D SLAM, then picks pallets up and stacks them into racking or block stacks up to 4.5 m. No reflectors and no floor tape.
Priced for your siteafter a survey. Buy, or hire on a 12-month contract with servicing included.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI).

The XQE122 is fully autonomous. It scans your building with 3D lidar and builds its own map, so it needs no reflectors, magnets or tape. Fork-tip lidar checks each pallet before it lifts, and it puts loads into racking or block stacks up to 4.5 m.
It handles pallets, gitterboxes, frames and odd-shaped loads up to 1,200 kg, and goes to its charger on its own when it is idle or the battery reaches a set level. One runs in our Navan demo warehouse, where you can watch it lift crates into the racking.

| Type | Autonomous reach stacker (AMR) |
|---|---|
| Capacity | 1,200 kg |
| Lift height | 4,500 mm |
| Navigation | 3D SLAM, with QR codes as an option |
| Load detection | Fork-tip lidar and 3D lidar |
| Safety | Lidar with several safety zones that slow it and then stop it |
| Battery | 48V 150Ah lithium-ion |
| Charging | Docks itself at 30% by default, or when idle. Charging station optional |
| Chassis | 1,365 mm |
| Turning radius | 1,544 mm |
| Aisle for loading | 2,891 mm |
| Systems | Links to WMS, MES and ERP. EP says it is VDA 5050 compatible |
From EP XQE122 product page. EP may change specifications, so ask us for the current datasheet.
Not sure it fits your route? Send us a short video of it and we'll tell you.
3D SLAM builds a map of the building and plans its own path around obstacles.
Fork-tip lidar checks the pallet pockets and the space before every lift.
Puts pallets into racking or block stacks, not just on the floor.
Goes to its charger when it is idle or low, ready for the next job.
Its lidar field is split into zones that slow it down and then stop it.
Pallets, gitterboxes, frames and oversized loads.
Filmed in the Clearlift automation centre at our Navan depot, not a factory video. Come and see it run, and bring one of your own pallets if you want to see it on your load.
This is EP's standard rollout for one robot on one job. Bigger projects take longer, and we agree the plan with you.
A short call about your routes. If it helps, see the robots working in our Navan demo warehouse.
We walk your site, or you send a video of the route, and we pick the routes worth automating.
We agree the job and how we will measure it. EP confirms the install date within 48 hours of your go-ahead.
EP ships from stock, and the robot reaches you in about a week.
Installed, programmed, tested and your team trained in one day. Then we service it.
Source: EP Equipment automation.
Automatic trucks you teach a route, and autonomous models that find their own way.
Anything else, call us on 01 5267 411 (ROI) or 028 3833 7038 (NI).
No reflectors, magnets or floor tape. It maps the building with 3D SLAM. It does need Wi-Fi where it works and space for a charger, which we plan at the site survey.
Up to 4.5 m, with loads up to 1,200 kg.
Yes. EP says it links to WMS, MES and ERP systems and is VDA 5050 compatible, so it can join an existing fleet system.
We price it for your site after the survey. You can buy it, or hire it on a 12-month contract with servicing included.
Yes. It runs in our demo warehouse at the Navan depot in Co. Meath.
Tell us about the route and we'll come back the same working day with a price, or show it to you in Navan first.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI).