1 / 11EP EFL1803-HV-9 high-voltage electric forklift
An 18 tonne high-voltage lithium-ion forklift rated at a 900 mm load centre, on large 12.00-24 tyres. For heavy industry, ports and construction materials.
- Lift capacity
- 18,000 kg
- Max lift height
- 8.0 m
- Lithium-ion
- High-voltage
- Load centre
- 900 mm
Ask us for a price and a delivery date.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI).
- Ireland's exclusive EP Equipment dealer
- Buy, or hire on a 12-month contract
- Delivered and serviced by our own engineers
- Download the EFL1803-HV-9 datasheet (PDF)
- See all EP heavy-duty forklifts
Who the EFL1803-HV-9 suits, and when to pick another model
Built for
- Steel mills, stockholders and mining
- Ports and heavy construction materials
- Loads up to 18 t with their centre up to 900 mm from the forks
- Replacing a large diesel truck outdoors
- Work in rain and cold, from -20 to 40°C
Look at another EP model if
- 16 t is enoughEFL1603-HV-916 t at 900 mm, 7,015 mm long
- Your loads are longerEFL1803-HV-1218 t at a 1,200 mm load centre
- Your loads go over 18 tEFL2503-HV-1225 t at a 1,200 mm load centre
Not sure? Tell us what you lift and we'll recommend the right truck.
What makes the EFL1803-HV-9 work
The EFL1803-HV-9 takes the 16 tonne HV-9 up to 18 tonnes, with bigger tyres, heavier forks and a longer wheelbase. Here's what it offers.
18 tonnes at 900 mm
The truck is rated for 18,000 kg at a 900 mm load centre, with 100 x 250 x 1,800 mm forks. Its 3,750 mm wheelbase and 24 inch tyres give a broad, stable base.
Quick for its size
A 90 kW PMSM drive moves 18 tonnes at 20 km/h and climbs 20% laden. EP says its high-voltage trucks deliver 1.5 to 2 times the performance of its low-voltage ones.
Efficient lithium power
The 18 t -9 runs on a 618V LFP pack rated for up to 4,000 cycles. Higher voltage means lower current and less heat, and EP puts the electricity saving at up to 15%. It also accepts 1C fast charging.
Cooled for hard work
Water cooling holds the battery at around 30 to 35°C and keeps the motor in range, while an oil circuit cools the hydraulics. It's quieter than fan cooling too.
Protected and monitored
Overcharge, over-temperature and short-circuit protection guard the battery. A vehicle control unit, turn speed control, an over-speed alarm and hydraulic mast buffering help the operator handle heavy loads safely.
Ready for bad weather
IPX4 overall and IP67 for the high-voltage parts, with an operating range of -20 to 40°C. Battery heating for cold-weather charging is standard, and twin front tyres add grip on rough ground.
The EFL1803-HV-9 in action
Photos from EP Equipment of the 16 to 18-tonne high-voltage EFL range, the family the EFL1803-HV-9 belongs to, at work. Tap a photo to enlarge it.
EFL1803-HV-9 technical specifications
Figures from EP's datasheet for the standard truck. Mast, battery and options change some values. Source: EP's EFL1803-HV-9 datasheet.
Capacity and lifting10
| Rated capacity | 18,000 kg |
|---|---|
| Tilt of mast/fork carriage forward/backward | 6° / 12° |
| Height, mast lowered | 3,700 mm |
| Free lift | 110 mm |
| Lift | 4,000 mm |
| Height, mast extended | 5,660 mm |
| Coupling height | 430 mm |
| Operating pressure for attachments | 180 bar |
| Oil volume for attachments | 80ℓ/min |
| Max lift height | 8,000 mm |
Dimensions and weight21
| Load centre distance | 900 mm |
|---|---|
| Load distance, centre of drive axle to fork | 1,030 mm |
| Wheelbase | 3,750 mm |
| Service weight | 24,100 kg |
| Axle loading, laden front/rear | 38770 / 3,330 kg |
| Axle loading, unladen front/rear | 11800 / 12,300 kg |
| Tread width, front | 1,880 mm |
| Tread width, rear | 2,200 mm |
| Height of overhead guard (cabin) | 3,220 mm |
| Seat height relating to SIP/stand height | 2,050 mm |
| Overall length | 7,370 mm |
| Length to face of forks | 5,550 mm |
| Overall width | 2,530 mm |
| Fork dimensions | 100 × 250 × 1,800 mm |
| Fork carriage width | 2,500 mm |
| Ground clearance, laden, below mast | 165 mm |
| Ground clearance, centre of wheelbase | 265 mm |
| Aisle width for pallets 1000×1200 crossways | 8,145 mm |
| Aisle width for pallets 800 × 1200 lengthways | 8,145 mm |
| Turning radius | 5,175 mm |
| Sound pressure level at the driver's seat | ＜75 dB(A) |
Performance8
| Travel speed, laden/unladen | 20 / 20 km/h |
|---|---|
| Lift speed, laden/unladen | 0.35 / 0.4 m/s |
| Lowering speed, laden/unladen | 0.5 / 0.35 m/s |
| Max. gradeability, laden/unladen | 20 / 30 % |
| Service brake | Mechanical/Hydraulic |
| Parking brake | Mechanical/Hydraulic |
| Turnover efficiency according to VDI 2198 | / |
| Steering design | Hydraulic |
Battery and electrics6
| Drive motor rating S2 60 min | 90 kW |
|---|---|
| Lift motor rating at S3 15% | 60 kW |
| Battery voltage/nominal capacity | 618.24 / 228V/Ah |
| Battery weight | 932 kg |
| Energy consumption according to DIN EN 16796 | 20.9 ¹⁾kWh/h |
| Charger output current | 115 A |
Tyres and wheels4
| Tyres | Pneumatic |
|---|---|
| Tyre size, front | 12.00-24-24PRmm |
| Tyre size, rear | 12.00-24-24PRmm |
| Wheels, number front/rear | 4×/2 x=drive wheels |
Other8
| Manufacturer | EP |
|---|---|
| Model designation | EFL180-9-HV-PRO |
| Drive | Electric |
| Operator type | Seated |
| Drawbar pull, laden/unladen | 92000 / 92000 |
| Max. drawbar pull, laden/unladen | 95000 / 95,000 N |
| Turnover output according to VDI 2198 | / |
| Type of drive unit | PMSM |
EFL1803-HV-9 against similar EP models
The closest EP heavy-duty forklifts by capacity and lift height.
| Spec | EFL1803-HV-9This model | EFL1803-HV-12 | EFL1603-HV-6 | EFL1603-HV-9 |
|---|---|---|---|---|
| Capacity | 18,000 kg | 18,000 kg | 16,000 kg | 16,000 kg |
| Max lift height | 8.0 m | 8.0 m | 8.0 m | 8.0 m |
| Battery | 580V / 304Ah | 580V / 304Ah | 618V / 228Ah | 618V / 228Ah |
| Turning radius | 5,175 mm | 5,175 mm | 4,650 mm | 4,950 mm |
| Overall width | 2,530 mm | 2,530 mm | 2,530 mm | 2,530 mm |
| Travel speed | 20 / 20 km/h | 20 / 28 km/h | 20 / 20 km/h | 20 / 20 km/h |
| Weight | 24,100 kg | 26,800 kg | 23,380 kg | 23,580 kg |
Buy it, or hire it on a 12-month contract
Buy it new
Own it outright. We supply it from stock or order it new from EP, and deliver it on our own trailer.
See what is in stockHire it
A new EFL1803-HV-9 at a weekly price on a 12-month contract, with servicing, repairs and inspections included.
How contract hire worksService and parts
Our own engineers service it, and we hold EP parts in stock. For parts, email parts@clearlift.eu.
Service and repairsQuestions about the EFL1803-HV-9
Anything else, call us on 01 5267 411 (ROI) or 028 3833 7038 (NI).
Can the EFL1803-HV-9 work outside?
Yes. It has bigger 12.00-24 tyres than the 16 t HV models, twin at the front, and 265 mm of clearance mid-wheelbase. Expect IPX4 overall, IP67 high-voltage parts and a -20 to 40°C working range, with battery heating for cold-weather charging.
How is it different from the EFL1603-HV-9?
Both are rated at a 900 mm load centre. The EFL1803-HV-9 lifts 18 t against 16 t, on 12.00-24 tyres instead of 12.00-20, with 100 mm thick forks instead of 90 mm. Its wheelbase is 3,750 mm against 3,500 mm, and it turns in 5,175 mm.
What lift height does it have?
For 18 t at a 900 mm load centre, the standard mast gives 4,000 mm of lift. Higher masts are offered up to 8,000 mm; tell us your stacking height and we'll confirm the rating there.
What battery does it use?
A 618V 228Ah LFP lithium-ion pack weighing 932 kg, with battery heating as standard so it can charge in cold weather. There's no watering, and it takes 1C fast charging and top-ups in breaks.
Can it replace a large diesel forklift?
Usually. It lifts 18 t at 900 mm, runs on 12.00-24 tyres and climbs 20% laden, which covers most heavy diesel work in ports, steel and building materials. With no engine, there's no fuel or oil to deal with. Send us your loads and site details.
What comfort features does the cab have?
The driver of this 18 t truck sits on a heated suspension seat and works the hydraulics with fingertip levers, with an operator presence system for safety. For year-round outdoor work, add air conditioning, LED work lights and reversing cameras.
Can I hire the EFL1803-HV-9?
Yes, on contract hire, at a weekly price on a 12-month contract, with servicing and repairs included. We don't offer short-term hire. See forklift hire.
How much does the EFL1803-HV-9 cost?
It depends on the mast, battery and options you need. Ask for a price and we'll quote it to buy outright or on contract hire.
Who services the EFL1803-HV-9?
Our own engineers, from our Navan depot and Portadown office, using EP parts. We look after customers across Ireland and Northern Ireland.
Other EP models to look at
The closest models in the range. Prices show where we have one in stock.
Similar to the EFL1803-HV-9
Get a price on the EP EFL1803-HV-9
Tell us your loads, lift height and site. We'll reply the same working day with a price to buy or to hire, and the right specification for the job.
Or call 01 5267 411 (ROI) or 028 3833 7038 (NI), or email sales@clearlift.ie.